 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CLV1550E-LF 9939 Via Pasar * San Diego, CA 92126 TEL (858) 621-2700 FAX (858) 621-2722 VOLTAGE CONTROLLED OSCILLATOR Rev A1 PHASE NOISE (1 Hz BW, typical) -60 -70 (f) (dBc/Hz) -80 -90 -100 -110 -120 -130 -140 1 E+3 FEATURES * Frequency Range: 1500 - 1600 MHz * Tuning Voltage: 0.5-5.0 Vdc * MINI-14MS - Style Package APPLICATIONS * Digital Radios * Basestations * Mobile Communications PERFORMANCE SPECIFICATIONS Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW, typ.) Harmonic Suppression (2nd, typ.) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance (max.) Pushing Pulling (14 dB Return Loss, Any Phase) 10 E+3 100 E+3 OFFSET (Hz) VALUE 1500 - 1600 -104 -35 0.5-5.0 47 03 50 50 <4 <2 -40 to 85 MINI-14MS 5 18 Vdc mA pF MHz/V MHz C UNITS MHz dBc/Hz dBc Vdc MHz/V dBm Operating Temperature Range Package Style POWER SUPPLY REQUIREMENTS Supply Voltage (Vcc, nom.) Supply Current (Icc, typ.) APPLICATION NOTES * AN-100/1 : Mounting and Grounding of VCOs * AN-102 : Proper Output Loading of VCOs * AN-107 : How to Solder Z-COMM VCOs All specifications are typical unless otherwise noted and subject to change without notice. NOTES: (c) Z-Communications, Inc. Page 1 All rights reserved LOW COST - HIGH PERFORMANCE VOLTAGE CONTROLLED OSCILLATOR TUNING CURVE, typ. 1700 1675 1650 1625 1600 1575 1550 1525 1500 1475 1450 1425 1400 0 0.5 1 1.5 2 2.5 3 3.5 4 CLV1550E-LF PAGE 2 FREQUENCY (MHz) 85 25 -40 c c c 4.5 5 TUNING VOLTAGE (Vdc) POWER CURVE, typ. POWER OUTPUT (dBm) 2 1 0 -1 -2 -3 -4 1437 25 c 1469 1498 1526 1551 1574 1594 1611 1627 1641 1655 FREQUENCY (MHz) PHYSICAL DIMENSIONS TYPICAL OF ALL PADS SEE NOTE 3 MINI-14MS 415-0073 REV. B (DRAWING NOT TO SCALE) .065 .031 .033 .027 .054 .121 0.500 DETAIL A 0.415 P2 0.415 TABS RANGE FROM 0.006 - 0.010 (4 PLACES) 0.315 -.005 .465 P1=VT P3 P2=RF OUT P3=Vcc P4=MOD INPUT P4 BOTTOM VIEW 0.315 NOTES: 1. THE INSIDE RADIUS OF ALL 14 HALF HOLES AT THE PERIMETER OF THE BOARD ARE PLATED TO PROVIDE A SURFACE FOR THE ATTACHMENT OF THE VCO TO A PCB IN 11 LOCATIONS, WITH 3 PADS BEING USED FOR ELECTROMECHANICAL INTERFACE. 14 SOLDER LOCATIONS REQUIRED. 2. THE SURFACE OF THE SHIELD IS TIN PLATED AND MAY BE SOLDERED TO. THE SHIELD'S BASE METAL IS COLD ROLLED STEEL. 3. THE GROUND PLANE IS GROUND AND ATTACHES TO A GROUND TRACK ON THE UPPER SIDE OF THE BOARD AS WELL AS THE SHIELD BY PTH. 4. UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE IN INCHES. 5. UNLESS OTHERWISE NOTED ALL TOLERANCES ARE AS FOLLOWS: TOLERANCES .XXX= .010 0.061 0.220 0.320 0.420 0.215 0.215 SEE DETAIL 'A' .220 0.090 0.025 0.000 0.200 P1 0.090 .031 0.000 .128 TYP 0.285 0.385 0.000 0.025 .475 (c) Z-Communications, Inc. Page 2 Printed in the U.S.A. |
Price & Availability of CLV1550E-LF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |